**** 21.1.0 UPGRADE NOTES ******* * * PROCEDURES HAVE CHANGED ON THE UPDATE. * BE SURE TO READ THE ENTIRE FILE * * Dates covered: 10/01/04 to 05/03/05 * For any questions and/or issues with this procedure please contact ABBASOFT Technical Support at (949)830-5113 or e-mail to tech@abbasoft.com General Installation Notes: 1. Downloading from Web Site: Partner, Net&Web Partner - All files are contained in Self-Extacting Zip file called R210100.exe NetPartner & Web Partner - All Web Server Files are contained in the Self-Extracting Zip file R210100NP.exe Depending on your Internet connection speed this download should take between 1 and 10 minutes. 2. You must be on 20.2.0 or higher before you do this upgrade. 3. These download files are ONLY for D3 systems. If you are currently on AP/PRO or earlier you must contact ABBASOFT to request a special cut to be sent on Floppy Disks or DAT Tape. 4. For UNIX Systems you must first download the files to a Windows based system, then follow the instructions to transfer the file to UNIX. Partner & Netpartner Installations: 1. From the web site click on the file R210100.exe, this will start the download to your local system. 2. You will be prompted for a location to save the file to. (Generally you would want this to be a place easily found I.E. C:\Download) 3. Through Windows, go to the folder you saved the file and double-click on the file to uncompress them. 4. Select to Unzip to uncompress the files to a directory The default is C:\windows\Temp, however you can change that to another directory. 5. Enter the password when prompted. If you do not have a password you must contact ABBASOFT Technical Support before continuing. 6. (NT) Create a new tape device from TCL DEV-MAKE -T Tape -A "X:\path\R210100.d3,P" Where X is the Drive Letter on NT the files are located Where path is the directory path(I.E. download) (UNIX) Go to a Command Prompt on the Window's Machine Change to the Directory you extracted the files to I.E. (C:\windows\temp) Type: ftp unix ip.address (where unix.ip.address is the ip address of the unix server Enter in your unix logon name (ie root) Enter in your unix password Type: cd unix.directory (I.E cd tmp) Type: bi Type: put R210100.d3 Type: bye Make the Devices for the new pseudotapes (LINUX) In linux, can not add new devices, must change a device we already have: chg-device [existing device#] name=[path and filename] type=floppy density=pseudo ex: chg-device 4 name=/release_20_2_0_R210100/r210100.d3 type=floppy density=pseudo 7. For Release 21.1.0 there is no additional Pre-Upgrade 8. Install Upgrade as Normal Trans-Update from the Installtion Menu Option #53 Using File: R210100.D3 The File Counts Should be as follows: BP-TO-CUSTOMER 328 DICT-TO-CUSTOMER 380 EBP-TO-CUSTOMER 2 EZMENU-TO-CUSTOMER 7 RPTD-TO-CUSTOMER 31 PR-TO-CUSTOMER 4 SCR-TO-CUSTOMER 35 TABLE-TO-CUSTOMER 451 W3EZMENU-TO-CUSTOMER 31 W3HTML-TO-CUSTOMER 3 W3JAVA-TO-CUSTOMER 2 DATA-TO-CUSTOMER 130 9. (optional) Once the Upgrade process is complete you may remove the Devices in D3 by entering the following command at TCL DEV-REMOV M# Where # is the Tape Device # to remove. 10. Since some main System programs have been updated you will need to logoff and then log back into the account. NETPARTNER Installations Only: 1. From the web site click on the file R210100NP.exe, this will start the download to your local system. 2. You will be prompted for a location to save the file to. (Generally you would want this to be a place easily found I.E. C:\Download) 3. Through Windows, go to the folder you saved the file and double-click on the file(s) to uncompress them. 4. Select to Unzip the files to a directory The default is C:\windows\Temp, however you can change that to another directory. 5. Enter the password when prompted. If you do not have a password you must contact ABBASOFT Technical Support before continuing. 6. Open the folder called NetPartner on the directory you saved it to This contains the updated Web Server Files(Documentation, Images..) If this is a new Installation copy over all the folders If this is an upgrade open each folder and copy over the following files answering yes to overwrite Attachments (Create only) Documentation Javascript Sidebar (First time Only) User Img Reports (Create Only) After loaded: There is a Post Upgrade BP that is run automatically after the upgrade. For NetPartner Accounts it will automatically Compile all the Tables and Menus so you no longer should need to do them manually. To be sure that this program ran you will need to check the following 1. Veirfy Table W3QUOTE_TABLE Prompt 1.07 Set AutoReturn to N;N Prompt 3 Set Default to DATE() 2. If you are using a CUSTOM Default Header Template, you must copy over or move logic from the standard template. To check if you have a custom template: Go to the Utility Flag menu #80, Then select Netpartner/Webparter Select NetPartner Flags, at Prompt #8 if it does not say ABBA then you are using a custom template. If you do not feel you need the custom you can just change the flag to ABBA If you need the custom template still, you must copy over the function catchSubmit from W3HTML ABBA.HEADFOOT.HTM(Lines 40-48) to your Default Template NAME.HEADFOOT.HTM, where NAME is the value in the Flag Table. Features and Additions: 1. Locking using 1 port instead of multiple ports - utf2,11,#47 = p 2. Alerts - show "task listing" on bottom right business portal: w3syscon 193=n w3syscon 184=w3wo_bus w3syscon 183=w3links_bus 3. Set all required fields to red. utf2,11,#52 = red (Need to recompile screens after this). 4. Turn on Revison Control: For each file, (currently supported: ord, ordd, qord, qordd, poh, pod) In netpartner, go to dc, maint, file definition entry, Set revision control to 'always' (or other option), save. 5. Run utr#30, #8, A)ll to rebuild user report writer files and dicts to be sorted and look nice. ----